VisionStat Plus MA-BCKS-7.0 Bedienungsanleitung PDF herunterladen (Seite 12)

Mobile Awareness

Menu (Continued)

3) System: The System menu will give you the option of

which type of Color-System to use, turning the blue Back

Screen on or off, the horizontal and vertical adjustments,

as well as zoom.

Press the CH– button on the Monitor to scroll up and

down to select your desired function. Press the ▲☼/▼☼

buttons on the Monitor in order to adjust the level of each

setting.

Color System: Select between PAL/AUTO/NTSC

Blue Back: Select between turning the Blue Back Screen on or off. If turned off, the

screen will be black when a Camera feed is not present. If turned on, the screen will

be blue.

Horizontal: Adjusts the horizontal alignment of the image on the Monitor.

Vertical: Adjusts the vertical alignment of the image on the Monitor.

Zoom: Select between 16:9 (represented by a 0) and 4:3 (represented by a 1).

Maintenance & Troubleshooting

Symptom Possible Causes and Solution

No Picture or Sound Does the Monitor Power LED light up? If not, the

Monitor does not have power. This could be due to

using an improper power supply or a loose connec-

tion. If it is RED, the Monitor has power but is not

turned on. GREEN indicates the Monitor is on.

No Picture Ensure that Cameras are connected properly.

No Sound Ensure the volume is turned up to a desired level

and not muted.

Dark Picture Ensure brightness and contrast are adjusted cor-

rectly. Check whether the environment temperature

is too low.

No Color Adjust color settings.

Upside down or inverted picture Use the remote control horizontal/vertical selection

switch to set proper orientation. This can also be

done using the Menu button on the Monitor and

going to System settings.

If the unit is not working properly, please review the following suggestions, prior to

contacting Mobile Awareness:

1) Double check all connections, including all 4-pin Camera and extension cable

connections, as well as the 22 pin wiring harness.

2) Check your power and ground connections. If utilizing a back-up Camera, be sure

the Brown Trigger Wire (from the 22-pin wiring harness) is connected to the vehi-

cle reversing light power source.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

VisionStat Plus MA-BCKS-7.0 Bedienungsanleitung Seite 12